Shirin-B
-
Nau'in nau'in wuƙa (JR-YAZZ-3)
Aikace-aikacen don mai tace mai na'ura mai aiki da karfin ruwa pleating
Ya dace da gyare-gyaren gyare-gyare na kayan tacewa daban-daban a cikin masana'antar masana'anta ta tace.Za a iya saƙa ragar ƙarfe (guda ɗaya ko multi-Layer), bakin karfe fiber sintered ji, nau'in tace takarda corrugated;Hakanan nadawa masana'anta mara saƙa, matattarar filastik (nau'in dumama clapper na'ura).The corrugated ne sosai ci gaba da daidaitacce, wanda shi ne musamman dace da nadawa aiki na Multi-iri-iri da kananan-tsari tace kayan.Za a iya musamman bisa ga abokin ciniki bukatun, corrugated nisa 300-2000mm, corrugated tsawo (tsawon hakori) 3-200mm
- Samfurin inji:Saukewa: ZBJ55x600TRQ
- Tsawon lalata:5-55 mm
- Faɗin corrugated:0-600
- Gabaɗaya girma:1600x1000x1500mm
- Tushen wutan lantarki:3.5kw
- Nauyi:600kg
- Samfurin inji:Saukewa: ZBJ55X1000TRQ
- Tsawon lalata:5-55 mm
- Faɗin corrugated:0-1000
- Gabaɗaya girma:1600x1400x1500mm
- Tushen wutan lantarki:4.5kw
- Nauyi:800kg
- Samfurin inji:Saukewa: ZBJ55X1300TRQ
- Tsawon lalata:5-55 mm
- Faɗin corrugated:0-1300 mm
- Gabaɗaya girma:1600x1700x1500mm
- Tushen wutan lantarki:6,2kw
- Nauyi:1100kg
-
Babban injin yin bututu
An yi amfani da shi don kayan aikin da ke samar da cibiyar sadarwa na cibiyar sadarwa na injunan diesel.Sunayen kayan aiki guda uku sune: tarakin ciyarwa ta atomatik, naushi mai sauri, da injin murɗa bututun tsakiya
- Diamita:30mm-80mm, za a iya musamman
- Faɗin farantin karfe:45mm ku
- Kaurin farantin karfe:0.25-0.5mm
- Abubuwan da ake buƙata:allon juriya na yatsa, takardar galvanized, tinplate
- allo mai juriya da yatsa, takardar galvanized, tinplate:15-30m
- Matsin iska:0.6MPa
- Tushen wutan lantarki:380V/50HZ
- Girma:1400mm*950mm*1450mm(550KGS)650mm* 650mm*1250mm (250KGS)
-
The raga slitting inji (Model 1400)
Injin da ake amfani da shi don yanke tsayin tarun ƙarfe
- Gudun ƙira:20m/min
- Faɗin ragar raga:100mm-1250mm
- Jimlar iko:1.5KW
- Matsin iska:0.6MPa
- Tushen wutan lantarki:380V/50HZ
- 680KG:680KG
- Girma:1900mm*1600*1450mm
-
Na'ura mai yankan ta atomatik (1000)
Ana amfani da shi don yanke tarun ƙarfe da murɗa su cikin da'ira
- Gudun ƙira:23m/min
- Faɗin aiki:1000mm
- Mafi ƙarancin diamita na nadi:90mm ku
- Jimlar iko:3KW
- Matsin iska:0.6Mpa
- Tushen wutan lantarki:380V/50HZ
- Nauyin kayan aiki:820kgs
- Girma:2000mm*1500*1350mm
-
The raga Spot waldi inji
Bayan na'urar yankan ragar ta nade ragar baƙin ƙarfe, ana amfani da wannan kayan don walda haɗin gwiwa.Haɗin yana buƙatar haɗuwa da kusan 10mm.
Daidaita tashin hankali ta atomatik, daidaita alkibla ta atomatik, da daidaita nisa da tsayi.
- Gudun ƙira:20m/min
- Faɗin ragar raga:100mm-1250mm
- Jimlar iko:1.5KW
- 1.5KW:0.6MPa
- Tushen wutan lantarki:Tushen wutan lantarki
- Nauyin kayan aiki:680KG
- Girma:1900mm*1600*1450mm
-
Auto Horizontal Multi-Layer Steel Clipping Machine (JR-JT-500)
Kayan aiki don manne hatimin nau'in tace mai mai ruwa
- Ƙarfin samarwa:6 PCS/min
- tace tsayin takarda:50-500 mm
- Karfe tsiri bayani dalla-dalla:kauri: 0.25-0.3mm nisa: 16m
- Ƙarfin mota:1.1KW
- Wutar lantarki:380V/50HZ
- Nauyin inji:400kg
- Girman gabaɗaya:1500×800×1200mm
-
Ƙarshen murfin manne allura
Wannan injin allurar manne za a iya sanye shi da nau'ikan nau'ikan nau'ikan manne mai gudana kamar 1: 5, 1: 8, 1: 6, da dai sauransu. Yana da injin servo, daidai ne kuma mai inganci, barga kuma mai dorewa, kuma ana amfani da shi sosai a ciki. filin tace element manne rabo.
- Fitowar manne:5-40 g
- Tsawon diamita na ƙarshen murfin:70-420 mm
- Ingantaccen samarwa:8pcs/min-20pcs/min (dangane da samfurin)
- Jimlar iko:5KW
- Matsin iska:0.6Mpa
- Tushen wutan lantarki:380V/50HZ
- Nauyin kayan aiki:350KGS
- Girma:1100mm*1100*1700mm
